How to Mount and Zero Your Dueck Defense Rapid Transition Sights

Sep 26, 2024 | News | 0 comments

Mounting and zeroing your Dueck Defense Rapid Transition Sights (RTS) is crucial for enhancing shooting accuracy and efficiency. Whether you’re a seasoned shooter or a beginner looking to improve your skills, properly setting up these low-profile offset iron sights ensures reliable performance in various shooting scenarios. This guide will take you through the step-by-step process of mounting and zeroing your Dueck Defense RTS, providing you with the knowledge to optimize your shooting experience. Remember, the process is the same for all versions of the RTS, including those with Trijicon Night Sights and Fiber Optic front sight.

Understanding Dueck Defense Rapid Transition Sights

Dueck Defense 45-degree offset RTS are made in the USA. They were designed by Barry Dueck and are machined from space-grade aluminum. The mil-spec hard anodized finish ensures a lifetime of durability and functionality. These offset iron sights are designed for quick target acquisition in close-quarters engagements. They are instrumental in transitioning between primary optics and iron sights, such as in tactical or competitive shooting. The RTS features a unique design that allows it to be deployed rapidly alongside your primary optic, ensuring minimal disruption to your shooting flow.

Mounting Your Dueck Defense RTS

Before you can zero your sights, you must ensure they are correctly mounted on your firearm. Follow these steps to mount both your right or left handed Dueck Defense RTS:

  1. Gather Your Tools: No special tools are required. All RTS sets only uses a flat-head screw and can easily be mounted or adjusted in the field. This is true for both the front & rear sight.
  2. Locate the Mounting Slots: Dueck Defense RTS are typically mounted on a Picatinny rail. Identify the appropriate slots where you want to place your sights.
  3. Position the Sights: Place the RTS on the rail, aligning it with the slots. Ensure it is positioned securely and evenly.
  4. Tighten the Mounting Screws: Use your screwdriver to tighten the screw that secures the RTS to the rail. Ensure they are snug but do not over-tighten, as this could damage the mounting hardware or rail.
  5. Check Stability: Once mounted, gently move the RTS to ensure it is firmly attached and does not wobble or shift. A stable mounting ensures consistent performance.

Zeroing Your Dueck Defense RTS

Zeroing your RTS involves aligning the sight with your firearm’s point of impact at a specific distance. Here’s how you can zero your Dueck Defense RTS effectively:

  1. Select Your Zeroing Distance: Determine the distance you want to zero your RTS. Typical distances are 25 yards/meters or 50 yards/meters, depending on your shooting preferences and the intended use of your firearm.
  2. Prepare Your Firearm: Ensure your firearm is unloaded and follow all safety protocols. Set up a target at your chosen zeroing distance.
  3. Align the Sights: Aim your firearm at the center of the target using the Dueck Defense RTS. Focus on aligning the front sight post or dot with the rear sight aperture or notch.
  4. Fire a Group of Shots: Fire three to five shots at the target while maintaining a consistent aim point and shooting technique.
  5. Evaluate Your Grouping: Examine the grouping of shots on the target. Adjust the RTS to move the point of impact to coincide with your point of aim.
  6. Adjust Windage and Elevation: Use the adjustment dials or screws on the RTS to make precise adjustments. All RTS models provide half MOA elevation windage adjustments for windage (horizontal) and elevation (vertical) corrections.
  7. Re-Fire and Confirm: Fire another group of shots after each adjustment to verify the changes made. Continue adjusting until the point of impact matches your desired zeroing distance.

Tips for Optimal Performance

Consistency is Key: Maintain consistent shooting fundamentals throughout the zeroing process.

Check and Double-Check: Verify your zero periodically to ensure it remains accurate, especially after transporting or storing your firearm.

Practice Regularly: Familiarize yourself with the RTS through regular practice sessions to build confidence in their use.

Seek Professional Guidance: If unsure, seek assistance from a qualified firearms instructor or gunsmith to ensure proper installation and zeroing.

Final Thoughts

Mounting and zeroing your Dueck Defense RTS is a straightforward process that significantly enhances your shooting capabilities. By following these steps and guidelines, you can ensure your RTS are correctly set up for accurate and reliable performance in various shooting scenarios. Remember, proficiency comes with practice, so take the time to familiarize yourself with your RTS and integrate them into your shooting routine for optimal results.

Ready To Upgrade To Rapid Transition Sights?

SHOP NOW

0
Search